STE-26

FILL THE HOLE WITH RESIN.

FILL THE SPACE BETWEEN THE PATCH AND THE ADJACENT STRUCTURE WITH SEALANT.

THE WARNING STOPS AT 17 DEG.

ALIGN THE PISTON WITH THE CENTER OF THE SLEEVE.

SETT HE CONTROLS TO THE CENTER POSITION.

SET THE CONTROLS TO THE NEUTRAL POSITION.

IF YOU ARE NOT SURE THAT THE RESULTS ARE CORRECT, DO THE TEST AGAIN.

SOME FUNCTIONS ARE NOT AVAILABLE.

THE SPECIFIED FUNCTIONS ARE NOT AVAILABLE.

WRITE THE CHANGE IN THE LOGBOOK.

GET APPROVAL FROM YOUR SUPERVISOR FOR THE REPAIR.

DO NOT LET THE WIRES RUB.

EXAMINE THE TUBING FOR WORN AREAS.

IF THERE IS A RISK OF LEAKAGE, PUT A CONTAINER BELOW THE UNIT.

IF THE LEVER MOVED ACCIDENTALLY, DO THE TEST AGAIN.