PUT THE SLEEVE INTO THE OPENING.
MAKE SURE THAT THE CONNECTOR ENGAGES IN THE MATING PART.
CLEAN THE INNER SURFACE OF THE CONTAINER.
PAINT THE INNER SURFACES OF THE PUMP ASSEMBLY.
CONNECT THE SUPPLY UNION IN THE AIRCRAFT.
SAFETY ALL COMPONENTS BEFORE YOU PUT THEM INTO THE FUEL TANK.
EXAMINE ALL THE DRAIN HOLES.
DO AN INSPECTION OF THE WORK.
USE A VOLTMETER TO DO THIS INSPECTION.
INSTALL THE NEW O-RINGS ON THE SPINDLE.
REFER TO PARAGRAPH 3 FOR INSTALLATION OF THE CANOPY.
USE A SPATULA AS AN ALTERNATIVE.
用户评论