请帮助翻译，谢谢！ 中译英

1. The line diameter of 0.05 mm-0.09, coiling laps of 2-3 laps.
2. If this product in online and molding process before, the products produced one of the reasons for the open. Because the products used enameled wire is very fine, products in molding, if the equipment vibration or product molding size too small may form open phenomenon. Excessive vibration, easy will enameled wire pins and vibration open, if forming small size, the molding curved feet, the roots will be due to excessive tension, enameled wire pins and will pull out of, form open phenomenon.
3. The number of JiaoJuan to less for its products produce open for another, for the product line size is very fine, line for 28 mm diameter, the line diameter winding head laps for 3 to 4 laps, if the number of JiaoJuan too few, the online production, inductance fever make feet and lead the feet out, which is now open

1 diameter 0.05 mm - 0.09, the number of windings of 2-3 ring.
2 if the product in the line and forming process, the product produced open one reason. Because the products used by the enameled wire is very fine, products in the shape, if the equipment vibration is too large or product molding size is too small may open phenomenon. Vibration is too large, easy to wire and pin vibration, if the molding size is too small, the molding bending, the roots will be subject to excessive tension, the wire and pin is pulled out, open phenomenon.
3 winding ring number is too small, the products have open the two reasons, because the product line size is very fine, wire diameter is 28mm, the diameter of wire winding head coil number 3-4 ring around the ring, if the number is too small, then the on-line production, inductive heating winding pin and the pin from the phenomenon, is open

为你提供正确的译文，放心用吧：

1.线径0.05 mm -0.09,绕线圈数为2-3圈。
1 The wire diameters range from 0.05 mm to 0.09 mm_ The coil has 2-3 laps.

2.如果该产品在上线前还有成型工序，其为产品产生开路原因之一。因该产品所用漆包线很细，产品在成型时，如果设备振动过大或者产品成型尺寸过小都可能形成开路现象。振动过大，易将漆包线与引脚振开，如果成型尺寸过小，则在成型弯脚处，根部会受到过大的拉力，将漆包线与引脚拉脱离，形成开路现象。
2.If this product went through a molding process before going online, this may be one of the causes of its open circuit. Because the enameled wire used for the product is very fine, the product's molding may result in an open circuit due to excessive equipment vibration or small size of the product. Excessive vibration may easily disconnect the enameled wire and pin; an excessively small size may result in too much expansion at the bent foot during molding, disconnecting the enameled wire and pin and opening the circuit.

3.绕脚圈数过少，其为产品产生开路原因之二，因该产品线径很细，线径为28mm，此线径绕线头圈数为3-4圈，如果绕脚圈数过少，则上线生产时，电感发热使绕脚与引脚脱离，产生现开路现象。
Too few coil laps is another cause of open circuit in the product. As the product has fine wires with a diameter of 28 mm, the coil has 3-4 laps. With too few laps, the wire terminals may be disconnect during wiring due to heating from electric induction, resulting in an open circuit.

1.Line diameter of 0.05 mm-0.09, coiling laps of 2-3 laps
2.If this product in online and molding process before, the products produced one of the reasons for the open. Because the products used enameled wire is very fine, products in molding, if the equipment vibration or product molding size too small may form open phenomenon. Excessive vibration, easy will enameled wire pins and vibration open, if forming small size, the molding curved feet, the roots will be due to excessive tension, enameled wire pins and will pull out of, form open phenomenon.
3.The number of JiaoJuan to less for its products produce open for another, for the product line size is very fine, line for 28 mm diameter, the line diameter winding head laps for 3 to 4 laps, if the number of JiaoJuan too few, the online production, inductance fever make feet and lead the feet out, produce the phenomenon is open