THE MAXIMUM PERMITTED DIFFERENCE IS 5 mm.
THE VALUES MUST NOT BE MORE THAN THE APPROVED DIFFERENCES.
MAKE SURE THAT THE PRESSURE IN THE CABIN IS ALMOST ZERO.
DATABASE SYNCHRONIZATION IS IN PROGRESS.
YOU CAN DO THIS PROCEDURE ONLY IF THERE IS NO OTHER REPAIR IN THE REPAIR AREA.
MAKE SURE THAT THE SOFTWARE IS INSTALLED IN THE REPOSITORY.
MOVE THE TENSIOMETER ALONG THE CABLE.
ALSO DO THE APPLICABLE STEPS OF THIS PROCEDURE.
IT IS POSSIBLE THAT THE INSTALLATION CHANGED THE ROUTING OF THE CABLE LOOM.
IF YOU CHANGE THIS REPAIR PROCEDURE, GET APPROVAL OF THE DESIGN AUTHORITY.
用户评论